# File generated by XConfigurator.

# **********************************************************************
# Refer to the XF86Config(4/5) man page for details about the format of 
# this file.
# **********************************************************************

# **********************************************************************
# Files section.  This allows default font and rgb paths to be set
# **********************************************************************

Section "Files"

# The location of the RGB database.  Note, this is the name of the
# file minus the extension (like ".txt" or ".db").  There is normally
# no need to change the default.

    RgbPath	"/usr/X11R6/lib/X11/rgb"

# Multiple FontPath entries are allowed (they are concatenated together)
# By default, Red Hat 6.0 and later now use a font server independent of
# the X server to render fonts.

    FontPath   "unix/:-1"

EndSection

# **********************************************************************
# Server flags section.
# **********************************************************************

Section "ServerFlags"

    # Uncomment this to cause a core dump at the spot where a signal is 
    # received.  This may leave the console in an unusable state, but may
    # provide a better stack trace in the core dump to aid in debugging
    #NoTrapSignals

    # Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
    # This allows clients to receive this key event.
    #DontZap

    # Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
    # sequences.  This allows clients to receive these key events.
    #DontZoom

EndSection

# **********************************************************************
# Input devices
# **********************************************************************

# **********************************************************************
# Keyboard section
# **********************************************************************

Section "Keyboard"

    Protocol    "Standard"

    # when using XQUEUE, comment out the above line, and uncomment the
    # following line
    #Protocol   "Xqueue"

    AutoRepeat  500 5

    # Let the server do the NumLock processing.  This should only be 
    # required when using pre-R6 clients
    #ServerNumLock

    # Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
    Xleds      1 2 3

    #To set the LeftAlt to Meta, RightAlt key to ModeShift, 
    #RightCtl key to Compose, and ScrollLock key to ModeLock:

    LeftAlt         Meta
    RightAlt        Meta
    ScrollLock      Compose
    RightCtl        Control

# To disable the XKEYBOARD extension, uncomment XkbDisable.

#    XkbDisable

# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults).  For example, for a non-U.S.
# keyboard, you will probably want to use:
#    XkbModel    "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
#    XkbModel    "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
#    XkbLayout   "de"
# or:
#    XkbLayout   "de"
#    XkbVariant  "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
#    XkbOptions  "ctrl:swapcaps"

# These are the default XKB settings for XFree86
#    XkbRules    "xfree86"
#    XkbModel    "pc101"
#    XkbLayout   "us"
#    XkbVariant  ""
#    XkbOptions  ""

   XkbKeycodes     "xfree86"
   XkbTypes        "default"
   XkbCompat       "default"
   XkbSymbols      "us(pc101)"
   XkbGeometry     "pc"
   XkbRules        "xfree86"
   XkbModel        "pc104"
   XkbLayout       "us"
   XkbOptions      "ctrl:nocaps"
EndSection

# **********************************************************************
# Pointer section
# **********************************************************************

Section "Pointer"
    Protocol    "PS/2"
    Device      "/dev/mouse"

# When using XQUEUE, comment out the above two lines, and uncomment
# the following line.

#    Protocol	"Xqueue"

# Baudrate and SampleRate are only for some Logitech mice

     BaudRate	1200
#    SampleRate	150

# Emulate3Buttons is an option for 2-button Microsoft mice
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)

    Emulate3Buttons
    Emulate3Timeout    50
    Resolution    100

# ChordMiddle is an option for some 3-button Logitech mice

#    ChordMiddle

EndSection


# **********************************************************************
# Monitor section
# **********************************************************************

Section "Monitor"
   Identifier      "Primary Monitor"
   VendorName      "Dell"
   ModelName       "CPt C400"
   HorizSync       31.5-48.5
   VertRefresh     55-90
   Modeline  "1024x768"   65.00 1024 1032 1176 1344 768 771 777 806 -hsync -vsync
EndSection

Section "Device"
   Identifier      "Primary Card"
   VendorName      "Neomagic"
   BoardName       "256ZX"
   VideoRam        4096
   Chipset         "NM2200"
EndSection

Section "Screen"
   Driver          "FBDev"
   Device          "Primary Card"
   Monitor         "Primary Monitor"
   #BlankTime       5
   #SuspendTime     15
   #OffTime         20
   SubSection "Display"
      Depth        16
      Modes        "default"
   EndSubSection
EndSection

Section "Screen"
   Driver          "SVGA"
   Device          "Primary Card"
   Monitor         "Primary Monitor"
   #DefaultColorDepth 24
   DefaultColorDepth 16
   BlankTime       5
   SuspendTime     15
   OffTime         20
   SubSection "Display"
      Depth        8
      Modes        "1024x768"
   EndSubSection
   SubSection "Display"
      Depth        15
      Modes        "1024x768"
   EndSubSection
   SubSection "Display"
      Depth        16
      Modes        "1024x768"
   EndSubSection
   SubSection "Display"
      Depth        24
      Modes        "1024x768"
   EndSubSection
   SubSection "Display"
      Depth        32
      Modes        "1024x768"
   EndSubSection
EndSection

Section "Screen"
   Driver          "VGA16"
   Device          "Primary Card"
   Monitor         "Primary Monitor"
   BlankTime       5
   SuspendTime     15
   OffTime         20
   SubSection "Display"
      Depth        4
      Modes        "1024x768"
   EndSubSection
EndSection

Section "Screen"
   Driver          "VGA2"
   Device          "Primary Card"
   Monitor         "Primary Monitor"
   BlankTime       5
   SuspendTime     15
   OffTime         20
   SubSection "Display"
      Depth        1
      Modes        "1024x768"
   EndSubSection
EndSection