New package TTS with initial version 1.0
Package: TTS
Type: Package
Title: Master Curve Estimates Corresponding to Time-Temperature Superposition
Version: 1.0
Date: 2015-09-14
Author: Antonio Meneses <antoniomenesesfreire@hotmail.com>, Salvador Naya <salva@udc.es>, Javier Tarrio-Saavedra <jtarrio@udc.es>
Maintainer: Antonio Meneses <antoniomenesesfreire@hotmail.com>
Depends: R (>= 3.0.1), mgcv, sfsmisc, splines
Description: Time-Temperature Superposition analysis is often applied to frequency modulated data obtained by Dynamic Mechanic Analysis (DMA) and Rheometry in the analytical chemistry and physics areas. These techniques provide estimates of material mechanical properties (such as moduli) at different temperatures in a wider range of time. This package provides the Time-Temperature superposition Master Curve at a referred temperature by the three methods: the two wider used methods, Arrhenius based methods and WLF, and the newer methodology based on derivatives procedure. The Master Curve is smoothed by B-splines basis. The package output is composed of plots of experimental data, horizontal and vertical shifts, TTS data, and TTS data fitted using B-splines with bootstrap confidence intervals.
License: GPL (>= 2)
LazyData: yes
NeedsCompilation: no
Packaged: 2015-09-26 01:45:56 UTC; usuario
Repository: CRAN
Date/Publication: 2015-09-26 09:11:32

More information about TTS at CRAN
Permanent link

Package DRIP updated to version 1.1 with previous version 1.0 dated 2015-09-22

Title: Discontinuous Regression and Image Processing
Description: This is a collection of functions for discontinuous regression analysis and image processing.
Author: Yicheng Kang <kangx276@umn.edu>
Maintainer: Yicheng Kang <kangx276@umn.edu>

Diff between DRIP versions 1.0 dated 2015-09-22 and 1.1 dated 2015-09-26

 DRIP-1.0/DRIP/src/modify1.f                    |only
 DRIP-1.0/DRIP/src/modify2.f                    |only
 DRIP-1.1/DRIP/DESCRIPTION                      |    8 +--
 DRIP-1.1/DRIP/MD5                              |   56 ++++++++++++-------------
 DRIP-1.1/DRIP/man/kid.Rd                       |    2 
 DRIP-1.1/DRIP/man/modify1.Rd                   |    2 
 DRIP-1.1/DRIP/man/modify2.Rd                   |    2 
 DRIP-1.1/DRIP/src/cluster_deblur.f90           |    6 +-
 DRIP-1.1/DRIP/src/cluster_denoise.f90          |    6 +-
 DRIP-1.1/DRIP/src/d_KQ.f90                     |    6 +-
 DRIP-1.1/DRIP/src/deblur_3stage.f90            |    8 +--
 DRIP-1.1/DRIP/src/deblur_3stage_bandwidth.f90  |   10 ++--
 DRIP-1.1/DRIP/src/denoise_3stage.f90           |    8 +--
 DRIP-1.1/DRIP/src/denoise_3stage_bandwidth.f90 |    9 +---
 DRIP-1.1/DRIP/src/extend.f90                   |    2 
 DRIP-1.1/DRIP/src/extend1.f90                  |    2 
 DRIP-1.1/DRIP/src/jp_llk_cv.f90                |    4 -
 DRIP-1.1/DRIP/src/jp_llk_fit.f90               |    4 -
 DRIP-1.1/DRIP/src/lc2k_diff.f90                |    4 -
 DRIP-1.1/DRIP/src/lck_diff.f90                 |    4 -
 DRIP-1.1/DRIP/src/ll2k_diff.f90                |    4 -
 DRIP-1.1/DRIP/src/llk_diff.f90                 |    4 -
 DRIP-1.1/DRIP/src/modify1.f90                  |only
 DRIP-1.1/DRIP/src/modify2.f90                  |only
 DRIP-1.1/DRIP/src/roofDetect_deblur.f90        |    8 +--
 DRIP-1.1/DRIP/src/roofDetect_denoise.f90       |    8 +--
 DRIP-1.1/DRIP/src/roofDiff_deblur.f90          |    4 -
 DRIP-1.1/DRIP/src/roofDiff_denoise.f90         |    4 -
 DRIP-1.1/DRIP/src/roofEdgeParSel_deblur.f90    |    8 +--
 DRIP-1.1/DRIP/src/roofEdgeParSel_denoise.f90   |   10 ++--
 DRIP-1.1/DRIP/src/surfest.f90                  |    4 -
 31 files changed, 100 insertions(+), 97 deletions(-)

More information about DRIP at CRAN
Permanent link

New package conover.test with initial version 1.1.0
Package: conover.test
Version: 1.1.0
Date: 2015-09-25
Title: Conover-Iman Test of Multiple Comparisons Using Rank Sums
Author: Alexis Dinno <alexis.dinno@pdx.edu>
Maintainer: Alexis Dinno <alexis.dinno@pdx.edu>
Description: Computes the Conover-Iman test (1979) for stochastic dominance and reports the results among multiple pairwise comparisons after a Kruskal-Wallis test for stochastic dominance among k groups (Kruskal and Wallis, 1952). The interpretation of stochastic dominance requires an assumption that the CDF of one group does not cross the CDF of the other. conover.test makes k(k-1)/2 multiple pairwise comparisons based on Conover-Iman t-test-statistic of the rank differences. The null hypothesis for each pairwise comparison is that the probability of observing a randomly selected value from the first group that is larger than a randomly selected value from the second group equals one half; this null hypothesis corresponds to that of the Wilcoxon-Mann-Whitney rank-sum test. Like the rank-sum test, if the data can be assumed to be continuous, and the distributions are assumed identical except for a difference in location, Conover-Iman test may be understood as a test for median difference. conover.test accounts for tied ranks. The Conover-Iman test is strictly valid if and only if the corresponding Kruskal-Wallis null hypothesis is rejected.
License: GPL-2
LazyData: no
Encoding: UTF-8
NeedsCompilation: no
Packaged: 2015-09-25 22:43:46 UTC; Alexis
Repository: CRAN
Date/Publication: 2015-09-26 09:12:31

More information about conover.test at CRAN
Permanent link

New package weightTAPSPACK with initial version 0.1
Package: weightTAPSPACK
Title: Weight TAPS Data
Version: 0.1
Author: David G. Carlson, Michelle Torres, and Taeyong Park
Maintainer: David G. Carlson <carlson.david@wustl.edu>
Description: The weightTAPSPACK subsets The American Panel Survey (TAPS) data by outcome and covariates, models the attrition rates, imputes data for attrited individuals, and finds weights for analysis.
Depends: R (>= 3.0.0), methods, survey, plyr, HotDeckImputation, mice
License: GPL (>= 2)
LazyDataCompression: xz
LazyData: yes
NeedsCompilation: no
Packaged: 2015-09-25 22:21:51 UTC; david
Repository: CRAN
Date/Publication: 2015-09-26 09:09:00

More information about weightTAPSPACK at CRAN
Permanent link

Package Cairo updated to version 1.5-9 with previous version 1.5-8 dated 2015-07-30

Title: R graphics device using cairo graphics library for creating high-quality bitmap (PNG, JPEG, TIFF), vector (PDF, SVG, PostScript) and display (X11 and Win32) output
Description: Cairo graphics device that can be use to create high-quality vector (PDF, PostScript and SVG) and bitmap output (PNG,JPEG,TIFF), and high-quality rendering in displays (X11 and Win32). Since it uses the same back-end for all output, copying across formats is WYSIWYG. Files are created without the dependence on X11 or other external programs. This device supports alpha channel (semi-transparent drawing) and resulting images can contain transparent and semi-transparent regions. It is ideal for use in server environments (file output) and as a replacement for other devices that don't have Cairo's capabilities such as alpha support or anti-aliasing. Backends are modular such that any subset of backends is supported.
Author: Simon Urbanek <Simon.Urbanek@r-project.org>, Jeffrey Horner <jeff.horner@vanderbilt.edu>
Maintainer: Simon Urbanek <Simon.Urbanek@r-project.org>

Diff between Cairo versions 1.5-8 dated 2015-07-30 and 1.5-9 dated 2015-09-26

 DESCRIPTION   |    6 +++---
 MD5           |    6 +++---
 NEWS          |    5 +++++
 src/cairogd.h |   21 +++++++++++++--------
 4 files changed, 24 insertions(+), 14 deletions(-)

More information about Cairo at CRAN
Permanent link